Model Number: AW CFP2166-01-1
Brand Name: Asenware
Key Specifications/Special Features:
1 zone fire alarm control panelAW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2/4 standardIt is the heart of the fire automatic alarm system, which can realize centralized control, can supply power to the detectors, manual call point, bellOne zone of the panel can match with 20 pieces fire alarm system accessoriesFeatures:1. It is modularized design, the panel can expend from 1 zone to 32 zones easily
2. It has 2 level control mode by a lock
3. It has 24V DC and 5V DC power supply output
4. It has fire and fault signal output
5. It has 2 general sounders output
6. Each zone has 1 circuit detectors input
7. Each zone can be disable by a button
8. It has reset button to reset the panel
9. It has silence button to stop buzzer and sounders
10. It has evacuate button to start a manual fire alarm immediately
11. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on
12. It has an optional GSM module for fire alarm by SMS
2. It has 2 level control mode by a lock
3. It has 24V DC and 5V DC power supply output
4. It has fire and fault signal output
5. It has 2 general sounders output
6. Each zone has 1 circuit detectors input
7. Each zone can be disable by a button
8. It has reset button to reset the panel
9. It has silence button to stop buzzer and sounders
10. It has evacuate button to start a manual fire alarm immediately
11. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on
12. It has an optional GSM module for fire alarm by SMS
Parameters | |
Item | 1 zone panel |
Model | AW-CFP2166-01 |
Main supply voltage | 110VAC or 220V AC |
Internal power supply | 27.2VDC |
Total output current limited | 500mA at 240V AC |
Batteries (default configuration) | 12V/2.3AH*2 |
End of line resistor value | 6.8k Ω,5% tolerance, 0.5-1W (colour code-blue, grey, red, gold) |
End of line resistor value | 6.8k Ω,5% tolerance, 0.5-1W (colour code-blue, grey, red, gold) |
Dimensions | 272x200x70mm |
Weight (without batteries) | 4kg |
Weight (with batteries) | 5.5kg |
Shipping Information:
- FOB Port: Shenzhen
- Lead Time: 3 - 5 days
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe